@siamhie the reason why some of the items are crossed out is because some of the information given below is sensitive.Code:
System: Kernel: 6.1.0-25-amd64 [6.1.106-3] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/vmlinuz-6.1.0-25-amd64 root=UUID=<filter> ro quiet splash init_on_alloc=1 init_on_free=1 Desktop: KDE Plasma v: 5.27.5 wm: kwin_wayland vt: 8 dm: SDDM Distro: MX-23.3_KDE_x64 Libretto January 21 2024 base: Debian GNU/Linux 12 (bookworm)Machine: Type: Laptop System: XXXX product: XXXXX v: N/A serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: XXXX model: XXXXX serial: <superuser required> UEFI: XXXXXXX date: 05/24/2023Battery: ID-1: BAT0 charge: 34.0 Wh (100.0%) condition: 34.0/36.2 Wh (94.0%) volts: 12.7 min: 11.4 model: Notebook BAT type: Li-ion serial: <filter> status: fullCPU: Info: model: 11th Gen Intel Core i3-1115G4 bits: 64 type: MT MCP arch: Tiger Lake gen: core 11 level: v4 note: check built: 2020 process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 2 microcode: 0x36 Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 160 KiB desc: d-2x48 KiB; i-2x32 KiB L2: 2.5 MiB desc: 2x1.2 MiB L3: 6 MiB desc: 1x6 MiB Speed (MHz): avg: 1126 high: 1273 min/max: 400/4100 scaling: driver: intel_pstate governor: powersave cores: 1: 1075 2: 1063 3: 1094 4: 1273 bogomips: 23961 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Vulnerabilities: Type: gather_data_sampling mitigation: Microcode Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional; RSB filling; PBRSB-eIBRS: SW sequence; BHI: SW loop, KVM: SW loop Type: srbds status: Not affected Type: tsx_async_abort status: Not affectedGraphics: Device-1: Intel Tiger Lake-LP GT2 [UHD Graphics G4] vendor: XXXX driver: i915 v: kernel arch: Gen-12.1 process: Intel 10nm built: 2020-21 ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1 bus-ID: XXXX chip-ID: XXXX class-ID: 0300 Device-2: XXXXX USB2.0 Camera type: USB driver: uvcvideo bus-ID: XXXX chip-ID: XXXX class-ID: XXXX serial: <filter> Display: wayland server: X.org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_wayland driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: 0 Monitor-1: eDP-1 res: 1920x1080 size: N/A modes: N/A API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel UHD Graphics (TGL GT2) direct-render: YesAudio: Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: XXXX driver: snd_hda_intel bus-ID: XXXX v: kernel alternate: snd_sof_pci_intel_tgl chip-ID: XXXX bus-ID: XXXX class-ID: 0300 chip-ID: XXXX class-ID: 0403 Device-2: C-Media USB Advanced Audio Device type: USB driver: hid-generic,snd-usb-audio,usbhid API: ALSA v: k6.1.0-21-amd64 status: kernel-api tools: alsamixer,amixer Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctlNetwork: Device-1: Intel Wi-Fi 6 AX201 driver: XXXX v: kernel modules: wl bus-ID: XXXX chip-ID: XXXX class-ID: XXXX IF: wlan0 state: up mac: <filter> Device-2: Intel Ethernet I219-V driver: XXXX v: kernel port: N/A bus-ID: XXXX chip-ID: XXXX class-ID: XXXX IF: eth0 state: down mac: <filter>Bluetooth: Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB driver: btusb v: 0.8 bus-ID: XXXX chip-ID: XXXX class-ID: XXXX Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block: hardware: no software: yes address: <filter> Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral acceptDrives: Local Storage: total: 709.83 GiB used: 9.37 GiB (1.3%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/XXXX maj-min: 259:0 vendor: XXXX model: XXXX size: XXXX GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: XXXX temp: 34.9 C scheme: GPT ID-2: /dev/sda maj-min: 8:0 vendor: XXXX model: XXXX size: XXXX GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: XXXX scheme: GPTPartition: ID-1: / raw-size: 10 GiB GiB size: 9.75 GiB GiB (97.45%) used: 277.9 MiB (2.8%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 ID-2: /usr raw-size: 20 GiB size: 19.52 GiB (97.59%) used: 6.67 GiB (34.2%) fs: ext4 dev: /dev/sda2 maj-min: 8:4 ID-3: /var raw-size: 5 GiB size: 4.84 GiB (96.79%) used: 2.34 GiB (48.4%) fs: ext4 dev: /dev/sda3 maj-min: 8:5 ID-4: /home raw-size: 100 GiB size: 97.87 GiB (97.87%) used: 732 MiB (0.7%) fs: ext4 dev: /dev/sda4 maj-min: 8:8Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) ID-1: swap-1 type: partition size: 20 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda5 maj-min: 8:9Sensors: System Temperatures: cpu: 39.0 C mobo: N/A Fan Speeds (RPM): N/ARepos: Packages: pm: dpkg pkgs: 2447 libs: 1333 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0 No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/mx.list 1: deb https://mxrepo.com/mx/repo/ bookworm main non-free 2: deb https://mxrepo.com/mx/repo/ bookworm ahsInfo: Processes: 200 Uptime: 21m wakeups: 2 Memory: 15.4 GiB used: 2.8 GiB (18.1%) Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26Boot Mode: UEFI
Using your heavily edited QSI, if your having network problems, how are we suppose to help if we don't know which driver you have loaded?
You've been asked several times to stop doing that, yet you keep doing it.
Quick System Info (QSI)
Unique identifiers such as serial numbers and UUIDs are generally filtered out of the Quick System Info.
Statistics: Posted by siamhie — Mon Sep 16, 2024 11:11 am
